How do I set up my metal spacers?

Follow these simple steps to get started: 1. First, position your sign using a level. 2. Use a pencil to mark the center of where the drilled holes are. 3. Unscrew the top part of the spacer from the bottom. 4. Drill the bottom part of each spacer into the wall using the included screws and anchors. 5. Hold your sign over the mounted bases, putting rubber washers between them and your sign. 6. Screw on the caps, with another rubber washer between them and your sign.

Metal Spacers

()

Add style to your signs with sleek metal spacers. Polished stainless steel with included wall anchors and washers.
See details

Create a polished, modern signage display.

8mm diameter
Stainless steel material
Wall anchors & rubber washers included
4 or 6 metal spacers per pack

Note: These steel spacers are intended for use with our metal, plastic and acrylic signs only.

Our stainless steel spacers are a professional-looking way to hang your acrylic, metal and plastic. Plus set up is a breeze – just follow the simple instructions in the FAQ tab.

Ready to order your metal spacers? Choose the quantity that works for you and add it to your basket. After that, we’ll take care of the rest, and your spacers will arrive ready to use.

FAQs

Reviews

()

Write a Review

Reviewed by 1 customers

Blurry

Aug 25, 2025 | Diana A. |

Verified Buyer

Unfortunately it came out very blurry. I wish I would have known it was a low quality file before it printed. I could have changed it. Vistaprint gave no indication that it would be low quality. It said it enhanced it but it is still unreadable. I am sure it was my file but I wish there was a warning so I could have looked at it again as it looked okay on the screen. The material and the look is amazing though but I am not sure I can get it reprinted so that is my cost wasted.

Response from Vistaprint Customer Care Team:

We're truly sorry to hear that your order didn’t turn out as expected. We understand how disappointing it must be to receive prints that appear blurry, especially when everything looked fine during the preview process. We appreciate your kind words about the material and overall look, and we're sorry the print quality has overshadowed that experience. While we do print files exactly as they are submitted and do not make any changes to the artwork, we understand that it can be frustrating if the final result doesn’t match what was anticipated. If you’re able to send us a few images of the items, we’d be happy to take a closer look and explore a solution for you. We truly appreciate your understanding and are committed to resolving this for you.

Frequently asked questions

Follow these simple steps to get started:

First, position your sign using a level.
Use a pencil to mark the center of where the drilled holes are.
Unscrew the top part of the spacer from the bottom.
Drill the bottom part of each spacer into the wall using the included screws and anchors.
Hold your sign over the mounted bases, putting rubber washers between them and your sign.
Screw on the caps, with another rubber washer between them and your sign.

Each spacer is 8 mm wide, and the drilled holes they go through are 14.5 mm.

Our spacers are made of stainless steel, and the rubber washers are made of nylon.